P a g e | 4
OIPB-I01029-Infinity2.0_v1.2
TABLE OF CONTENTS
1. INTRODUCTION 6
2. ABOUT THIS MANUAL 6
3. IMPORTANT SAFETY INSTRUCTIONS 7
o
1.
SAFETY INSTRUCTIONS FOR ALL TOOLS 7
o
2.
ADDITIONAL SAFETY RULES FOR RIDING FLOOR SCRAPERS 8
4. GENERAL OPERATING INSTRUCTIONS FOR THE TERMINATOR
®
9
5. SAFETY FEATURES 9
o 1. AUTO STOP 9
o 2. EMERGENCY STOP BUTTON 9
o 3. SAFETY INSTRUCTIONS 9
6. TERMINATOR
®
INFINITY SPECIFICATIONS 10
o 1. TOOLS AND SUPPLIES 10
7. VENTILATION REQUIREMENTS 10
8. GUARDS, WARNING NOTICES & SIGNS 10
9. SERVICE INSTRUCTIONS & PERSONNEL 11
10. REPLACEMENT PARTS & MATERIALS 11
11. UNCRATING AND PREPARING THE TERMINATOR
®
FOR OPERATION 11
o 1. TO REMOVE THE TERMINATOR
®
FROM A CRATE WITH A FORKLIFT: 12
o 2. TO REMOVE THE TERMINATOR
®
FROM A CRATE WITHOUT A FORKLIFT: 12
12. LOADING/UNLOADING PROCEDURES 12
13. OPERATOR CONTROLS 12
o 1. DRIVE/JAW CONTROLS 12
o 2. AUTO STOP 13
o 3. EMERGENCY BRAKE 13
14. DISPLAY & INDICATORS 13
o 1. BATTERY/HOUR METER 13
o 2. EMERGENCY STOP 13
15. ELECTRIC MOTOR & BATTERIES 13
16. BLADE ASSEMBLY 13
17. TAKING UP FLOOR COVERINGS 14
18. TRICYCLE OR CASTER WHEELBASE AND TIRES 14
19. BATTERY SAFETY 14
o 1. RECEIVING THE TERMINATOR
®
14
To Next Page
Loading...