- 31 -
6.3 Safety instructions for maintenance
o Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
7. Possible Malfunctions
Malfunction Cause Solution
Does not cool
• Improperly connected
power cord
• Safety fuse has gone off.
• Power outage
• Damaged temperature
regulator.
• Remove plug and reinsert into
socket.
• Check the fuse, check the
device by connecting to
another socket.
• Check the power source
• Contact a sales agent
Insufficient
cooling
• Device too close to
source of heat or
sunlight.
• Poor air circulation.
• Improper temperature
setting.
• Device is overfilled.
• Ensure sufficient space
between device and heat
sources.
• Ensure proper space from walls
and other objects
• Check settings, set lower
temperature values.
• Remove excess food articles.
Device emits loud
sounds
• Device on uneven surface.
• Device touching wall or
other objects.
• Place thedevice on level
surface.
• Ensure distance between wall
and other objects.
If a malfunction occurs, disconnect the device from its power source. Before
contacting a service agent, try to solve the problem following the steps given
above. If you cannot remove the malfunction, contact a service or sales agent to
inspect and repair the device.
To Next Page
Loading...