Installation and operation
18 / 22 A150670
Food Preparation
1. Open the appliance using the handle and lift the top grill plate.
2. Depending on the product to be grilled, the grill plates should be greased with a
small amount of edible oil to prevent product burning.
3. Put food products prepared for grilling onto the bottom grill plate.
4. Close the appliance using the handle.
There is no need to flip the grilled products, as both grill plates are heated up.
5. Watch the grilled product during processing until the grilling process is finished.
6. Remove the grilled food from the grill plate.
ATTENTION!
When removing the ready food, do not use any hard nor sharp or pointed
implements to avoid damaging the surface of grill plates.
Switching the appliance OFF
1. If the appliance is not used, rotate the temperature control knob to '0' position.
2. Disconnect the appliance from the socket (pull the plug out).
To Next Page
Loading...
