- 39 -
6.3 Operation
Before the first use, clean the device according to the instructions in section 7
“Cleaning”.
Place an appropriate cookware with food in the middle of the hob.
CAUTION!
Do not place an empty pot on the hob.
Warming up an empty pot or frying pan activates the overheating protection
system; an audio signal will sound and the device turns off. “E2“ error code
will appear on the display.
Remove the pot from the hob and leave the device for a few minutes to cool off.
Then, you may start using the device again.
Control panel
Function button: power /
temperature /time
Button for decreasing power,
temperature or time
LED indicators: power,
temperature, time
Button for increasing power,
temperature or time
To Next Page
Loading...