Bartscher Q 25 - Page 28

Possible Malfunctions
22 / 30 104304
EN
Malfunction
Alarm
Appliance Condition
Solution
No water alarm
Appliance stops or waits
for another attempt of
automatic start-up
Check water supply
Check water circulation for water
leaks
Check water inlet valve for
operation, clean if necessary
Check sensor position
Deposit probe
damage alarm
Appliance stops
Check probe connection to PCB
Check probe integrity
Replace the damaged probe
Periodic
maintenance
alarm
Appliance continues
operation
Contact the service company
(Reset the alarm by touching the
control key for 10 seconds)
Condenser high
temperature alarm
The appliance stops; the
condenser's fan remains
on in order to reduce the
condenser's temperature
Check condenser for cleanliness
and ventilation
Check fan for operation
Evaporator probe
damage alarm
Appliance stops
Check evaporator probe
connection to PCB
Replace the damaged probe
High pressure
alarm
The appliance stops; the
condenser's fan remains
on in order to reduce the
condenser's temperature
Check condenser for cleanliness
and ventilation
Check if condenser fan rotates