Baseline 500 - User Manual

READ these instructions before
placing unit in service. KEEP these
and other materials delivered
with the unit in a binder near the
machine for ease of reference by
supervisors and operators.
See
RIM Safety page 3
Operating
Instructions
on page 8.
Manual Part No.: 85610373 00
Revision: 01/16
Model 500 ShownModel 300 Shown
Rim Clamp
®
Tire Changers
For servicing single piece automotive and
most light truck tire/wheel assemblies.
Safety Instructions
Set Up Instructions
Operation Instructions
Maintenance Instructions

Summary

Safety Instructions

Owners Responsibility

Owner's responsibility for machine and user safety, following instructions.

Set Up Instructions

Location and Workspace Requirements

Guidelines for selecting an optimal and safe location for the equipment.

Tower Installation

Operation Instructions

Bead Loosening and Demounting

Detailed steps for safely loosening tire beads and demounting tires.

Mounting Tires

Procedures for safely mounting new tires onto wheels, emphasizing checks.

Inflation Process

Describes the three steps of inflation: bead seal, bead seat, and final inflation.

Bead Seating Procedure

Guidance on safely seating tire beads, including pressure limits and checks.

Stages of Inflation

Mismatched Tires and Wheels

Operation with Robo-Assist Helper Arm

Bead Loosening and Demounting (Robo-Assist)

Mounting Tires (Robo-Assist)

Maintenance Instructions

Mount;Demount Tool Maintenance

Robo-Assist Helper Arm Maintenance

Pressure Regulator Maintenance

Oil Injector Maintenance

ONE WORD FOR SAFETY: R.I.M.

Safety Guidelines and Warnings

Summarizes critical safety procedures and warnings for tire changing.

Baseline 500 Specifications

General

Brand	Baseline
Model	500
Category	Tyre Changers
Language	English