Important: Always read and follow operating instructions. • 7
Replace any damaged or missing safety
decals. They are available from Hennessy
Industries, Inc., (800) 688-6359.
1 Pressure Safety Valve — The high pres-
sure safety valve is set to exhaust at line
pressures above 185 PSI.
2 Air Inflation Gauge — Registers tire
pressure when clip-on chuck is attached
to tire valve stem and inflation pedal is
released.
3 Tower — Support for horizontal and
vertical slides, also air storage tank.
4 Important Safety Decal — Important
safety information for the operator. DO
NOT obstruct with tire stickers or other
materials.
5 Inflation Pedal — Three-position pedal
that allows inflation of tires through air
hose and clip-on chuck.
6 Bead Sealing Nozzles — Expands tire
sidewall to bead seat area of rim to seal
tire to rim and allow inflation.
7 Clamps — Holds wheel to table top for
tire changing. Position outward to allow
outside clamping of wheels.
8 Table Top — Rotating chuck for tire
changing.
9 DuckHead
®
Mount/Demount Tool —
Mounts and demounts tire from wheel.
10 Swing Arm Adjustment Knob — Adjusts
swing arm/vertical slide assembly for
proper horizontal positioning of mount/
demount head.
11 Bead Loosener Handle — Controls
operation of bead loosener shoe.
12 Lube Bottle — Dispenser for rubber
lubricant.
13 Clamp Control Pedal — Three-position
pedal that opens, holds or closes rim
clamps.
14 Bead Loosener Control Pedal — Con-
trols operation of bead loosener shoe.
15 Table Top Pedal — Three-position
pedal that controls rotation of table top
(forward, o, reverse).
16 Bead Lifting Tool — Used to lift and
position tire bead correctly on Duckhead
®
mount/demount tool.
17 Tire Bumper Guards — Provides pro-
tective surface when bead loosening tires.
18 Bead Loosener Shoe — Pivoting shoe
for loosening tire beads.
19 Vertical Slide Locking Handle — Locks
and unlocks vertical slide and sets correct
vertical position to maintain tool/wheel
clearance.
20 Robo-Assist™ Helper Arm — Provides
extra leverage when mounting/demount-
ing tires.
21 Helper Arm Control Valve — Controls
vertical movement of helper arm cylinder.
To Next Page
Loading...
