EasyManua.ls Logo

Baseus CGNL020101 - Safety Instructions; Product Parameters

Baseus CGNL020101
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Safety instructions
*Improper use of the product can easily cause damage to the product or may endanger
personal and property safety.
1. Ensure that the EC5 plug is fully inserted into the jump starter port before using.
Please do not use when remaining power is less than 50 % or the power supply is hot.
2. Do not use the jump starter to continuously start the car a high frequency. The
interval between two ignitions must be greater than 30 s.
3. After connecting the smart ignition clip to the jump starter, please start the car
immediately. If the car will not start, check whether the smart ignition clip is
connected firmly. Also check whether there is rust or dirt on the surface of the battery
interface. Start the car after cleaning the surface of the battery terminals. If the car
cannot start after three consecutive attempts, please stop jumping the battery.
4. Avoid using electrical appliances or loads that exceed the output current of this
product. Do not store in an environment with high temperature, strong light and
strong magnetic fields. Keep it dry and away from water. Do not place the product in
other harsh environments such as close to heat and fire.
5. Consumer shall be liable for any personal and property damage resulted from their
improper use against the user manual or ignoring the warning, to which our company
will not bear any legal liability.
Product parameter
Name:
Super Energy Air Car Jump Started
Model No.:
BS-CH001
Capacity:
10 000 mAh /3.7 V (37 Wh)
Type-C Input:
5 V 2.4 A (Max)
USB Output:
5 V 2.4 A (Max)
Starting voltage:
12 V
Starting current:
500 A
Applicable model: Petrol cars with a displacement of below 4.0 l or diesel cars with a
displacement of below 2.5 l (car battery: 12 V).