BASKETBALL PROBASE PROBASE - Step 15: Insert the Pole

- 11 -
INSTALLATION GUIDE
*For assemblies including ange nuts (intergrated washer nuts), you will not have at washers in your kit.
14
INSERT HARDWARE
Once the main pole holder is
levelled, insert the remaining bolts
(J), at washers* (L), nuts (K) in
each of the unused holes.
14.1 14.2
Tighten rmly.
14.3
15
INSERT THE POLE
Insert the pole of your basketball
hoop into the main pole holder (B)
by placing it on the ground and
pulling it up.
15.1