To Next PageTo Next Page
Need help?Do you have a question about the Basler A302f and is the answer not in the manual?
General| Brand | Basler |
|---|---|
| Model | A302f |
| Category | Digital Camera |
| Language | English |
Describes monochrome (A302fs) and color (A302fc) models available for the A302f.
Details technical specifications including sensor type, resolution, frame rate, and power.
Outlines operating temperature, humidity, and ventilation needs for the camera.
Identifies the IEEE 1394 socket and 9-pin micro-D plug on the camera housing.
Details the pinouts for the IEEE 1394 and 9-pin micro-D connectors for data and control.
Explains input (ExTrig) and output (IntEn, TrigRdy) signals for camera operation.
Describes the function of the green (power) and yellow (signal integrity) LEDs on the camera.
Details how to set exposure time and control exposure start via interface or external trigger.
Explains the Basler-specific trigger ready signal for precise exposure timing.
Covers adjusting image gain and brightness for optimal image quality.
Describes how to define a specific region of the sensor for data acquisition.
Explains the feature for correcting image non-uniformities caused by optics and lighting.
Lists standard and customizable video output formats, modes, and frame rates.
Specifies the correct sequence for writing camera configuration registers upon power-up.
Provides a list of registers available for camera control and status inquiry.
Details how to access and use vendor-specific advanced features of the camera.
Provides physical dimensions, mounting hole details, and mounting precision.
Warns about lens thread length limitations for C-mount lenses to prevent damage.
Explains how to diagnose camera issues by interpreting the status of the yellow and green LEDs.
