Basler A302f - Camera Interface Details; Connections

Camera Interface
BASLER A302
f 2-1
DRAFT
2 Camera Interface
2.1 Connections
2.1.1 General Description
The A302f is interfaced to external circuitry via an IEEE 1394 socket and a 9-pin micro-D plug
located on the side of the housing. Figure 2-1 shows the location of the two connectors. There are
also two status LEDs on the back of the camera. The LEDs indicate signal integrity and power OK
(see Section 6.1).
Figure 2-1: Camera Connectors and Indicators
9 Pin
Micro D
Plug
IEEE
1394
Socket
Green LED
Yellow LED
(Power OK)
(Signal Integrity)