To Next PageTo Next Page
Need help?Do you have a question about the Bassi EAGLETRONIC MTL2 SR6000 and is the answer not in the manual?
Safety rules, precautionary actions, qualified personnel, and general warnings.
Shock prevention, installation, grounding, charging leads, and battery terminals.
Service, maintenance, burn prevention, fire/explosion prevention, and connector arcing.
Immediate treatment for electrical shock victims and acid exposure.
Purpose of MTL2 chargers and main features of the digital charge controller.
Identification of display, STOP, and MANUAL-EQUALIZE buttons on the front panel.
Operating environment, temperature, humidity, and general safety during installation.
Connecting the charger to the AC power supply using appropriate cables.
Selecting input voltage for SR4803 using the selection board.
Setting power transformer taps based on measured AC input voltage.
Setting the gassing point voltage for optimal battery charging.
Connecting the battery and the charger's voltage validation and autostart.
Display parameters, charge curve, and monitoring during the charging process.
Safety timer, data saving, fuse detection, and auto shutdown on disconnection.
Overview and operation of manual, daily, auto equalize, and refresh modes.
Shutting down the charger manually using the STOP button.
General| Brand | Bassi |
|---|---|
| Model | EAGLETRONIC MTL2 SR6000 |
| Category | Battery Charger |
| Language | English |
