Ranges of both folding algorithms can be extended via CV or by
assigning the CTRL knob to FOLD.
Note: The fundamental frequency will be weakened by such aprocess,
which will result in less bass in your signal. This issue is commonly
addressed by mixing the oscillator outputs together.
10 – RING
The RING mode does ring modulation between the MAIN oscillator
and one of the OCT or RATIO oscillators. The RING mode is, in fact,
amultiplication of two waveforms (as if one modulates the other thru
abipolar VCA), and the increased modulation introduces new harmonics
and mainly the frequency of adding and subtracting the initial oscillator
frequencies.
The SHAPE fader works similarly to the FM INDEX fader with the RATIO
oscillator ring-modulation depth on the left and OCT oscillator on the
right (and no ring-mod in the middle).
Tip: Use FM INDEX with RATIO oscillator and RING with OCT oscillator
(or vice versa) to engage both modulating oscillators.
Note: With CTRL assigned to one SHAPE parameter and the SHAPE
fader to another, you can use both at once.
To Next Page
Loading...