Need help?Do you have a question about the Bastl PIZZA and is the answer not in the manual?
General| Brand | Bastl |
|---|---|
| Model | PIZZA |
| Category | Music Equipment |
| Language | English |
Adjusts octave and detunes oscillators for modulation.
Allows semitone transposition and fine-tuning.
Controls depth of frequency modulation applied to the MAIN oscillator.
Attenuverts CV affecting FM INDEX for modulation control.
Selects one of four octaves for the octave oscillator.
Selects one of four user-settable frequency ratios for the RATIO oscillator.
Mode to edit frequency ratios using PITCH knob and button.
External signal input for advanced FM duties, replacing octave oscillator.
Controls wave shaping with two modes and CV input.
Controls shape of OCT and RATIO oscillators (square, sine, saw).
Applies wave folding algorithms to the MAIN output, adding harmonics.
Performs ring modulation between MAIN and OCT/RATIO oscillators.
Assignable control knob and CV input for various destinations.
Lists available destinations for the assignable CTRL control.
Resets oscillator phases for hard-sync sounds and cleans transients.
External pitch control input with calibration features.
Mode for calibrating the V/OCT input for accurate pitch tracking.
Outputs a pulse version of the MAIN oscillator, width modulated by FM INDEX.
Main oscillator output after FM, FOLD, and RING, affected by VCA.
OCT oscillator output after WAVE-shaping, affected by VCA.
To Next Page