Bastl PIZZA - PITCH and TUNE; OCTAVE and DETUNE; TUNE mode

1
The PITCH knob and button give access to all tuning-related duties and
will prevent you from accidentally detuning your oscillator.
OCTAVE and DETUNE
Asingle press of the PITCH button will switch between OCTAVE mode
and DETUNE mode.
In OCTAVE mode, the PITCH knob adjusts the octave (+/-4 octaves).
In DETUNE mode, the PITCH knob will detune the OCT OSC and the RATIO
OSC from the MAIN OSC. The detuning will animate the FM timbres and
bring the RING modulation to life.
If you move the PITCH knob to the right, it will detune the OCT and RATIO
OSC exponentially. If you move it to the left, it will detune them linearly in
Hz, which will keep the resulting beating LFO-style modulation constant
regardless of the pitch.
TUNE mode
Along press of the PITCH button will access the TUNE mode, where you
can adjust semitone transposition and fine-tuning.
The TUNE and the OCTAVE lights will pulsate, alternating: the PITCH
knob adjusts semitone transposition (+/-12 semitones).
By pressing the PITCH button again, the lights will pulsate, alternating
between the TUNE and the DETUNE light: the PITCH knob adjusts the
fine-tune +/-120 cents.
The PITCH section affects all oscillators, and further, you can adjust
their relative frequency ratios. You do that either by selecting one of the
4 options with the RATIO and OSC buttons, or by assigning the CTRL to
control the pitch of either of these oscillators.
PITCH and TUNE