Electrical equipment
Consult the electrical diagram for any repair work of the
electrical equipment.
First of all make sure that all electrical parts are well
grounded.
Ceck the bulbs for proper condition.
Check the wires for short circuiting or being
disconnected.
Turn signal kit troubles
A) Check bulbs, grounding, switch and connections.
B) Check fuse (pict. 45, item A) in master pack.
C) Check flasher K by replacing.
D)
If
the nickel-cadmium battery B is flat it may be
recharged with a max. current of 1 Amps.
If recharging is not possible the battery has to be
replaced.
K
Pict. 45
F.S
To Next Page
Loading...