EasyManua.ls Logo

Batbox Duet - Technical Specifications; Mode 1: Heterodyne Specifications; Mode 2: Frequency Division Specifications; General Specifications and Features

Batbox Duet
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Batbox
www.batbox.com
email: sales@batbox.com
SPECIFICATIONS:
MODE 1 Heterodyne
Tunable range: (heterodyne) 17kHz – 125 kHz
Bandwidth: >16kHz
Tape out (3.5 mm socket): line level to right channel only
Headphone out (3.5 mm socket): to both channels (8 -16 ohm)
Display: 12.5 mm digital LCD with back-light
Counter accuracy: less than 100Hz
Display Accuracy: 1 digit
MODE 2 Frequency division
Divide by 10
Dynamic input waveform tracking circuit
Tape out: line level to left channel only
Microphone: electret condenser
Range : 17kHz –125kHz
Ref : Momentary voice commentary button to left channel
GENERAL
Suitable recording formats: MP3, DAT, MiniDisc, compact cassette
Speaker: weatherproof 35mm
Amplifier: 350mW (max)
Power supply: 1 x 9v PP3
Quiescent current: 22mA
Wrist strap: high-strength polyester woven cord
Case: fitted soft nylon micro-weave with zip and belt loop
Dimensions: 125 x 69 x 32 (mm)
Weight: 147gm (without battery)
Due to continuing improvements, specifications may change without notice.
(Windows is a trademark of the Microsoft Corporation)
Batbox Duet is made in England by Batbox
Batbox
Scott Bader Innovation Centre
Wollaston
Northants
NN29 7RL
Tel: 01903 816298
Leaflet design : www.harwoodcreative.co.uk