Batca Fusion 2 - Page 23

www.batcafitness.com 23 Fusion 2 Owner’s Manual
Figure 13
Item # Part # Description Qty
75 BFH-50605 3/8" Pulley Spacer 2
76 BFH-50123 HCS 3/8"-16 X 2 1/2" P5 1
77 BFM-50505 3 1/2" Pulley Cover 1
92 BFH-50256 1/2” Jam Nut 1
104 CAB-13025 Fusion Leg Extension Cable 1
113 BFH-50250 1 1/4" Shoulder Bolt 1
114 BFH-50267 5/16"-18 Nylock (Black) 1
185 BFM-51158 Spacer 1
All Flat Washers and Nylocks are 3/8” unless otherwise noted.
90 1/2”
Note: Each Cable with a threaded bolt on
either end must be threaded at
least 1/2” into its attachment.
Step 13:
Item # Part # Description Qty
8 BFH-50173 3 1/2" Pulley 5
60 BFH-50147 3/8” Lock Washer (Black) 1
50 BFL-50221 Pulley Plate 1
56 BFH-50146 3/8" Flat Washer (Black) 7
57 BFH-50122 HCS 3/8"-16 X 2 1/4" P5 3
58 BFH-50157 3/8"-16 Nylock (Black) 4
70 BFH-50121 HCS 3/8”-16 X 2” P5 1
73 BFH-50285 HCS 3/8"-16 1 3/4" P5 1
Note: If Leg Press Option is purchased later,
remove CAB-13026 and Cable Tie-Out
Plate from Step 12 on Page 22.