www.batcafitness.com 37 Fusion 2 Owner’s Manual
Note: All levelers (Beveled (98) or Large Flat (181)) should have
at least 1/2” of the threads threaded in to its counterpart. It
is very important that the 3/8” Jam Nut (99) be wrench
tightened to the counterpart to ensure that the leveler does
not back out of the counterpart.
1
Refer to Figure
10
2
Refer to Figure
14
4
Refer to Figure
11
6
Refer to Figure
13
To Next Page
Loading...
