PAGE 108 / 119
USER MANUAL NUMBER/VERSION: MU-001/12.0 APPLICATION DATE: 10/10/19
C/ Illa de Buda, 2 (P.I. Sud-Oest)
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003
www.batec-mobility.com info@batec-mobility.com
5.2.2. ADJUST STEM ANGLE
With the Batec anchored, adjust the angle of the stem on the Batec in order to fit the
handlebar to the user’s arm length, using the screws indicated. The upper and lower
screws must be set on the same number. If the user doesn’t have any other preference or
limitations, we recommend position 3.
To Next Page
Loading...
