PAGE 40 / 119
USER MANUAL NUMBER/VERSION: MU-001/12.0 APPLICATION DATE: 10/10/19
C/ Illa de Buda, 2 (P.I. Sud-Oest)
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003
www.batec-mobility.com info@batec-mobility.com
4. OPERATING THE BATEC / USER GUIDE
4.1. DELIVERY
Your new Batec will be delivered in a cardboard box. In order to prevent damage during
transport, parts that must be assembled later, like the battery, are packaged separately
inside the cardboard box.
4.2. UNPACKING:
• Check that the outside of the cardboard box hasn’t been damaged in any
way during transport.
• Remove all of the packing materials.
• Remove the parts of the Batec (including the battery and charger) from the
cardboard box and check that they are all there.
• Check that all the parts are in proper conditions, without any sort of
damage, scratches, tears, dents, irregularities or other defects.
• If you find any problems, or if any pieces are missing, notify the authorised
distributor immediately.
4.3. LIFTING AND TRANSPORT:
The Batec has been designed so that users can easily remove and detach the battery on
their own.
• When taking the Batec on any means of transport (car, bus, train, plane,
etc.), we recommend removing the battery before your journey: turn the
battery key to OPEN, remove the key and then remove the battery.
• When lifting the Batec, we recommend removing the weight as indicated in
section 3.10 and the battery as per section 4.9.1.
• When transporting the Batec in the boot of a vehicle, we recommend
leaving it attached to a wheelchair whenever possible.
The Batec is not designed to be used as a means of transport inside a vehicle.
To Next Page
Loading...
