– 18 –
- To turn, turn the HANDBIKE BATEC ELECTRIC with one hand while propelling
the wheelchair with the other.
• Lights: There is a button on the HANDBIKE BATEC ELECTRIC handlebar to switch
on the front and rear lights. When you push the button, the front light will go on
light is below the battery and the two rear lights, on either side of the stand
(ee g. 26a, 26b, 26c)
•
BATEC ELECTRIC HANDBIKE in Figure 58.
• Turn on: Turn the key on the right side of the battery clockwise to the ON po-
-
(See
g. 27)
•
(ee g. 27)
•
you to activate the throttle. (ee g. 28)
•
you to activate the brake. (ee g. 29)
• Front and back gears:
each with a light indicator on the display panel.
– In back gear, there is only one speed and one light indicator on the display
panel.
– When the HANDBIKE BATEC ELECTRIC is switched on, it will always be in front
gear, position 1.
F button to switch back to front gear. (ee g. 30)
To Next Page
Loading...
Need help?
General
