– 29 –
ENG
Disinfecting the HANDBIKE BATEC ELECTRIC
To disinfect the HANDBIKE BATEC ELECTRIC, follow the steps below:
- Use a hydro-alcoholic sanitiser and a cloth.
-
bars, buttons, display panel and detaching lever.
- Leave to air dry.
IMPORTANT!
after prolonged contact. Clean it after use in these conditions.
Cleaning front and rear wheels
Checking brakes
Greasing cables and chains
grease.
Greasing the transmission mechanism
-
Having HANDBIKE BATEC ELECTRIC serviced by an authorised distributor
-
Replacing tyres and inner tubes
-
tube caused by burrs and sharp spoke heads.
To Next Page
Loading...
Need help?
General
