Bath Royale Round BR500 - Install Mounting Base Covers; Re-attach Seat; Care and Cleaning Advice; Installation Troubleshooting

Questions? Visit BathRoyale.com or call (704) 589-1009
Installation Instructions
5
9. Place mounting base covers on mounting
bases.
10. Replace seat.
Align holes with mounting posts and carefully
lower seat onto posts.
Tip: Push down and jiggle, making sure both
posts are completely inserted. (If difcult, re-check
alignment of posts and holes).
Tip: Practice removing seat (Step 8) and replacing
seat (Step 10).
CARE & CLEANING TIP: DO NOT spray or saturate the mounting bases. (Doing so may
cause seat to move out of position). Spray your cloth rst, then wipe.
Troubleshooting Tips:
a. Rear bumpers are not supposed to touch the bowl until person is seated.
b. If seat or lid do not stay open, adjust the seat forward (see Step 6). Increasing the length also
increases layback angle. Make sure tank lid is pushed back as far as possible.
c. See more tips and installation video at BathRoyale.com.
10.
9.