Batribike Nova S - Troubleshooting

14
TROUBLESHOOTING
If an error occurs the LED display will show a code by flashing the
first battery light. Make a note of the number of flashes and turn off
the bicycle power at both the LCD and the battery switch. After 2
minutes turn on the power again. If the code re-occurs contact your
dealer for assistance.
Diagnostic Error Messages
First Light Flashes
Number of
Flashes
Error
Type
Action
Required
2
Motor Error
Check Motor Plug, if all OK
contact Dealer for Assistance
3
Controller Error
Contact Dealer for Assistance
4
Display Error
5
Brake Sensor Error
8
Low Battery Voltage
Charge the Battery
Contact Dealer for Assistance
Check brake lever returns
fully, if all OK contact Dealer
for Assistance