What to do if the BATTERIES PLUS Battery Charger has a flashing red LED?
If the BATTERIES PLUS Battery Charger shows a flashing red LED, it indicates reverse polarity. To resolve this, reverse the battery connections.
What to do if the BATTERIES PLUS Battery Charger has a solid red LED?
If the BATTERIES PLUS Battery Charger displays a solid red LED, this means the battery is not accepting a charge in standard charging mode. The suggested solution is to change the charge mode to Recovery Mode.
Why is the BATTERIES PLUS Battery Charger showing a flashing yellow LED?
A flashing yellow LED on the BATTERIES PLUS Battery Charger indicates that the battery capacity may be too high for the selected mode. Verify the battery capacity and the selected charge mode.
What to do if the BATTERIES PLUS Battery Charger shows a solid yellow LED?
If the BATTERIES PLUS Battery Charger displays a solid yellow LED, it means the battery voltage is either too high or too low for the selected mode. You should verify both the battery voltage and the selected charge mode.
Crucial safety guidelines and warnings to prevent fire, electric shock, and injury.
Key safety measures for operation, including ventilation, eye protection, and tool usage.
Measures for personal well-being, including clothing, jewelry, and emergency preparedness.
Guidelines for safe interaction with batteries, including acid contact and charging restrictions.
Instructions for securely mounting the charger using self-drilling screws.
Recommendations for placing the charger away from batteries and in a ventilated area.
Details on the charger's eight modes, including special handling for Lithium and Recover modes.
Description of 12V and 24V charging modes, including Normal and Cold/AGM settings.
Explanation of Power Supply, Advanced AGM, Lithium, and Recover modes for specific battery types.
Estimated charging times for various battery sizes (Ah) at 12V and 24V.
Steps for preparing the battery and charger, including terminal cleaning and voltage selection.
Procedure for connecting the charger clamps or eyelets to battery terminals, noting polarity.
Steps to initiate charging after connecting, including selecting the appropriate mode.
Explanation of the four SOC LED indicators (25%, 50%, 75%, 100%) and their flashing/solid states.
Guidance on interpreting LED error conditions and their corresponding reasons and solutions.
General| Brand | Batteries Plus |
|---|---|
| Model | X2Power SLC10005A |
| Category | Battery Charger |
| Voltage | 12V |
| Amperage | 10A |
| Input Voltage | 120V AC |
| Output Voltage | 12V DC |
| Desulfation Mode | Yes |
| Battery Voltage Detection | Automatic |
| Reverse Polarity Protection | Yes |
| Overcharge Protection | Yes |
| Short Circuit Protection | Yes |
| Cooling | Fan Cooled |
| Display | LED Indicators |
| Battery Type | AGM, GEL, Flooded Lead Acid |
| Maximum Charge Rate | 10A |
| Charging Modes | Automatic |
To Next Page
