Bauer Compressors P41 - Cartridge Replacement; Figure 4-4 Oil and Water Separator; Figure 4-5 Sintered Metal Filter Assembly

Purification Systems
Page 27 3rd Edition, Rev 0 Chg 6
4.4.2 Cartridge Replacement
To change the cartridge, proceed as follows. (See Figure 4-6)Disconnect the power and shut off the inlet
supply line, if applicable.
1. Depressurize the system by means of the bleed valve.
2. Unscrew the chamber head using the special wrench supplied.
3. Pull out the cartridge using the lifting ring on top of the cartridge.
Figure 4-4 Oil and Water Separator Figure 4-5 Sintered Metal Filter Assembly
1. Filter Head
2. Sintered Metal Filter
3. Center Screw
4. O -rings
1
2
3
4