Chiseling
Chisel Operation
1.
Adjust the Auxiliary Handle
as
needed.
2.
Set the Function by adjusting the Mode Selector to
the desired setting. Adjust the speed
as
needed.
3.
Plug
in
the Power Cord.
4.
Squeeze and hold the Trigger to
turn
on
the Rotary Hammer.
5.
Allow the Rotary Hammer to reach full speed
before contacting the work surface.
6.
When finished, to prevent accidents, release the
Trigger and disconnect its power supply after use.
a.
Allow the bit to cool then remove it from the tool.
b.
Wipe off the bit's shank and store
bit separately from tool.
c.
Clean the tool, then store the tool
indoors out
of
children's reach.
Item 64425
Bauer
For technical questions, please call 1-888-866-5797.
Page
11
To Next Page
Loading...