Operating
Instructions
A. Read
the
ENTIRE IMPORTANT SAFETY INFORMATION
section
at
the
beginning
of
this
..
manual
including
all
text
under
subheadings
therein
before
set
up
or
use
of
this
product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Release the Trigger and
unplug
the
tool
from
its
electrical
outlet
before
adjusting
the
tool
or
installing
accessories.
Adjusting
the
Auxiliary
Handle
Hammer Drill Chisel
Mode Mode
Auxiliary
Handle
Figure C: Mode
Selector
Figure B:
Auxiliary
Handle
Band
Adjust the Mode Selector to the desired function before
using the Rotary Hammer. Press the Release Button
and rotate the Mode Selector until it clicks
in
place
with the Indicator pointing
to
the desired function.
NOTICE: Move the Mode Selector only when the
Motor
is
stopped. Attempting to move the Mode
Selector while the Motor
is
engaged will result
in
abrupt bit rotation and can cause property damage.
NOTICE: When moving the Mode Selector,
make sure
it
clicks into the desired position. If
not locked
in
place, the Mode Selector could
slip out
of
position resulting
in
tool damage.
To
Hammer Drill: Rotate the Mode Selector
to
the Hammer Drill Mode setting. The
tool will hammer drill when powered.
To Chisel: Rotate the Mode Selector to the Chisel
Mode setting. The tool will chisel when powered.
Adjusting
the
Functions
The Auxiliary Handle can be placed
in
a
variety of positions to obtain
an
efficient
working angle and
to
act as a depth stop.
To
adjust the Auxiliary Handle, turn the Handle
counterclockwise to loosen the Band. Slide
the Handle to the desired position then turn the
Handle clockwise
to
secure the Band
in
place.
Adjusting
Speed
Near the Power Cord
is
the Speed Control adjustment
dial. Turn the dial
to
the desired speed level.
The higher the number the faster the speed.
Speed
Adjust
Figure
D:
Speed
Control
Item 64425
For
technical
questions,
please call 1·888·866·5797.
Page 9
To Next Page
Loading...