Page 6 For technical questions, please call 1-888-866-5797. Item 56912
User Servicing Instructions
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK:
Turn the Power/Speed Switch of the Blower off, unplug the Blower from its electrical outlet, and allow the
Blower to cool completely before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM BLOWER FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the Blower. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. Clean outside housing regularly to prevent dust
from accumulating in the air inlets/outlet. Use damp
cloth during cleaning and dry before use. Do not
open housing for cleaning or any other reason.
3. WARNING! TO PREVENT SERIOUS
INJURY: If the supply cord of this Blower
is damaged, it must be replaced only
by a qualified service technician.
If Blower suddenly stops operating
The Overload Protection may have tripped.
Before pressing the Circuit Breaker Reset Button and continuing to use the Blower, make sure:
• that the Blower is dry,
• that the air inlets/outlet are not obstructed, and
• that the Blower has cooled completely.
Record Serial Number Here:
Note: If Blower has no serial number,
record month and year of purchase instead.
Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.
To Next Page
Loading...
