Page 19For technical questions, please call 1-888-866-5797.Item 57622
SAFETYOPERATIONMAINTENANCE SETUP
Cleaning, Maintenance, and Lubrication Schedule
Note: This maintenance schedule is intended solely as a general guide. If performance decreases or if equipment
operates unusually, check systems immediately. The maintenance needs of each piece of equipment will differ
depending on factors such as duty cycle, temperature, air quality, and other factors. If you have doubts about your
ability to safely service this tool, have a qualified technician service the equipment instead.
Periodic Maintenance or When Replacing Saw Chain:
a. Clean and lubricate Chain Guide Bar
and turn over. When doing this, the Bar
Support Plate will need to be remounted
to the other side of the Guide Bar.
b. Deburr Guide Bar as needed.
c. Check Chain Sprocket for wear or damage.
Monthly Maintenance:
Clean Chain Oil Tank.
If Worn or Damaged:
a. Replace Chain Guide Bar if it becomes
worn, bent or damaged. When doing
this, the Bar Support Plate will need to
be remounted to the new Guide Bar.
b. Sharpen or replace Saw Chain.
To Previous Page
Loading...