Page 8 For technical questions, please call 1-888-866-5797. Item 57622
SAFETY OPERATION MAINTENANCESETUP
Specifications
Electrical Rating 120 VAC / 60 Hz / 14.5A
Motor Speed 5800 RPM (No Load)
Lubrication
Type Bar and chain oil
Capacity 6.8 fl oz (200 ml)
Cutting
Attachment
16" Sprocket Nose Chain Guide Bar
Low-Kickback Full Skip Chain
Pitch: 3/8"
Gauge: 0.050"
# of links: 57
Note: This electric chain saw is for cutting small logs and for lighter weight trimming jobs.
A more powerful chain saw may be needed for heavy duty use.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 22.
Safety Device Explanation
1. Hand Guard – A guard that protects your hand
on the Front Handle from the Saw Chain.
2. Chain Brake – A mechanical braking device
designed to quickly stop the Chainsaw and Chain
in the event of kickback. If kickback occurs, this
safety feature is activated when the operator’s
hand strikes the Hand Guard / Chain Brake Lever
and pushes it forward, stopping the Chain.
3. Trigger Lockout – A movable stop that
prevents the unintentional operation of
the Trigger until manually activated.
4. Low-Kickback Chain – A chain that complies
with the kickback performance requirements
of ANSI B175.1-1991 when tested on a
representative sample of chain saws.
To Next Page
Loading...