Page 8 For technical questions, please call 1-888-866-5797. Item 56877
SAFETY OPERATION MAINTENANCESETUP
Assembly
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Assembly Diagram on page 18.
Remove shipping caps from Water Inlet/Outlet.
Attach Wheels
1. Insert Wheel Axle (37) through Wheel (36).
2. Insert Axle on Wheel through hole
in Lower Frame (27).
3. Place Washer (35) over end of Axle and
secure it in place with an R-Pin (34).
4. Repeat the previous steps for the other Wheel.
Wheel
Axle (37)
Wheel (36)
Washer (35)
R-Pin
(34)
Lower
Frame (27)
Attach Handle
1. Hold the Spring Button (45) near each end of Handle
(1) in while inserting the ends into Lower Frame (27).
CAUTION! Be careful to avoid pinching your hands.
2. Slide Handle into Lower Frame until both
Spring Buttons pop out into place.
Handle (1)
Lower
Frame (27)
Spring
Buttons
(45)
To Next Page
Loading...