GETTING STARTED GUIDE
1
PARTS LIST
2
3
4
INSTALLATION AND POWER CONNECTION
1 Install the stand (see page 6 of the instruction manual).
2 Connect the antenna cable to the Antenna socket of
the TV.
3 Insert the batteries into the remote control.
4 Connect the TV power cord into the mains power
socket and switch it on.
5 Press the button on the remote control to turn on the
power to the unit. The standby light will turn blue and
the TV screen will display the initial setup.
What you will need:
• Phillips head screwdriver (for stand installation)
• Antenna cable
49” 4K Ultra High Definition LED LCD TV
Model number: ATV49UHD-0418
In the box you will find:
1 x 49” 4K Ultra High Definition
LED LCD TV
1 x Remote Control
2 x AAA Activ Energy Batteries
1 x Composite AV Cable
2
4
8 9
3
1
CONNECTIONS
1 Power Cord
2 Optical Digital Audio Output
3 L/R Stereo Audio Inputs
4 CVBS Input (Composite Video)
5 Y/Pb/Pr Input (Component
Video)
6 Line Out (Audio)
7 HDMI 1/2/3/4 Inputs
8 Antenna Input
9 USB Inputs
5
6
7
7
REMOTE CONTROL
• Information on all remote control functions can be found on pages iii -iv
of the Instruction Manual.
• Always point the remote control transmitter directly at the TV.
Transmitter
2 x Stand Bases (including
screws)
1 x Instruction Manual
1 x Getting Started Guide
1 x Warranty Card
To Next Page
Need help?
General
