GETTING STARTED
1
PARTS LIST
2
3
4
INSTALLATION AND POWER CONNECTION
1 Install the stand (see page 5 of the
instruction manual).
2 Connect the antenna cable to the Antenna
socket of the TV.
3 Insert the batteries into the remote control.
4 Connect the TV power cord into the mains
power socket and switch it on.
5 Press the button on the remote control
to turn on the power to the unit. The
standby light will turn blue and the TV
screen will display the initial setup.
WHAT YOU WILL NEED
Phillips head screwdriver (for stand installation)
Antenna cable
55” 4K Ultra High Definition LED LCD TV
Model number: ATVUHD55-1216
In the box you will find:
1 x 55" (139.7cm) 4K Ultra High Definition LED LCD TV
1 x Remote Control
2 x AAA Activ Energy Batteries (not pictured)
1 x Composite AV Cable (not pictured)
2 x Stand Bases (including screws)
1 x Instruction Manual
1 x Getting Started Guide
1 3 4
6 7 8
52
CONNECTIONS
1 Power Cord
2 Optical Audio Output
3 Audio L/R Input
4 Video Input (Composite)
5 Y/Pb/Pr Input (Component)
6 HDMI Inputs
7 Antenna Input
8 USB Inputs
6
REMOTE CONTROL
• Information on all remote control functions can be found on page iii
of the Instruction Manual.
• Always point the remote control transmitter directly at the TV.
Transmitter
To Next Page
Need help?
General
