13
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au
Resetting the Power Meter
1. Locate the red RESET button on the front of the energy monitor.
2. Use a pen or a pencil to push down on the reset button for a few
seconds.
3. The screen will go blank.
4. Release the RESET button – all settings will be the factory default
settings.
Cumulative Time Display
Your Power Meter will begin to count the time that an appliance has been in
use when it detects power usage over 2W. This will be displayed at the top
of the LCD display. You can swap between the clock and cumulative time
using the CLOCK button.
When showing the cumulative time in use, DAY will be displayed on the LCD
display to indicate days of use. This will increase when 24hrs of cumulative
usage has occurred.
To Next Page
Loading...
Need help?
General
