Why my BAUKER PCT162 does not start?
If your BAUKER Staple Gun isn't starting, first ensure it's properly connected to a power supply and switched ON. If the issue persists, a defective power cord or plug, or another electrical defect might be the cause. In such cases, it's best to have it checked by a specialist electrician.
What to do if fasteners jam in BAUKER PCT162?
If fasteners are jamming in your BAUKER Staple Gun, make sure you are using the recommended size fasteners. Also, discontinue using bent fasteners. Check for loose magazine/nose screws and tighten them. The driver channel could be worn or the driver broken/chipped; in either case, replace the nail/staple.
General| Brand | BAUKER |
|---|---|
| Model | PCT162 |
| Category | Staple Gun |
| Language | English |
General guidelines for maintaining a safe and clean work environment.
Precautions to prevent electric shock during operation.
Essential personal safety measures and protective equipment.
Proper usage, maintenance, and storage of the power tool.
Guidelines for tool servicing by qualified personnel.
Always assume the tool is loaded with fasteners for safety.
Never point the tool at yourself or others.
Ensure tool is firmly against workpiece before actuating.
Disconnect power and use caution when removing jammed fasteners.
Safety precautions for fastening electrical cables.
Icons representing safety precautions like eye/ear protection and warnings.
Symbols for manual consultation and electrical insulation.
Symbol indicating proper disposal of electrical waste.
Lists and identifies all parts of the staple gun.
Key technical specifications including voltage, impact rate, and capacity.
Lists compatible staples and nails provided with the tool.
Measured sound pressure level emitted by the tool.
Measured sound power level emitted by the tool.
Details on hand-arm vibration emission and uncertainty.
Tips to reduce exposure to vibration during tool use.
Specifies the intended applications for the staple gun.
Step-by-step guide for loading fasteners into the magazine.
How to adjust the impact force using the preselection knob.
Instructions for turning the staple gun on and off.
How to use the tool to drive fasteners into material.
Procedures for cleaning and maintaining the staple gun.
Identifies causes and solutions for the tool not powering on.
Addresses issues where the tool lacks sufficient power.
Solutions for common causes of fastener jamming.
Guidance on the responsible disposal of the product.
Instructions for wiring a replacement plug for UK and Ireland.
Safety notes on fuse rating and connecting wires correctly.
Details about the stapler gun's description and intended function.
Lists directives and standards the product conforms to.
Information about the person authorized to compile the technical file.
To Next Page