To Next PageTo Next PageWhy is my Bauknecht Cookers oven not working?
Your Bauknecht Cookers oven might not be working due to a power cut or disconnection from the mains. Check if there is mains electrical power and ensure the oven is properly connected to the electricity supply. You can also try turning off the oven and restarting it to see if the issue persists.
What to do if my Bauknecht Cookers display shows 'Hot' and the function won't start?
If your Bauknecht Cookers display shows 'Hot' and the selected function won't start, it means the temperature is too high. Allow the oven to cool down before activating the function. Alternatively, select a different function.
General| Brand | Bauknecht |
|---|---|
| Model | BAK5S KP8V2 BLG |
| Category | Oven |
| Oven Type | Electric |
| Energy Efficiency Class | A+ |
| Oven Capacity | 71 liters |
| Number of Functions/Cooking Programs | 8 |
| Temperature Range | 50-250°C |
| Thermostat Range | 50-250°C |
| Control Type | Electronic |
| Cleaning System/Type | Catalytic |
| Width | 595 mm |
| Height | 595 mm |
| Number of Ovens | 1 |
| Built-in Display | Yes |
| Cool Door | Yes |
| Grill | Yes |
| Convection Cooking | Yes |
| Convection Power | 2000 W |
| Defrost Function | Yes |
| Power | 3650 W |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Color | Black |
| Door Material | Glass |
For switching the oven on by selecting a function. Turn to the 0 position to switch the oven off.
With the oven switched on, press to turn the oven compartment lamp on or off.
For accessing cooking time settings, delayed start, and timer. Displays time when oven is off.
The oven's digital display for showing information and settings.
Buttons used for changing cooking time settings and other parameters.
Turn to select the desired temperature when activating manual functions.
Procedure to uncouple lower hooks and pull runners upwards to remove them from upper hooks.
Hook upper hooks into guides, press lower part until lower hooks click into place.
Grip guide, pull to extract support and pins. Reposition by inserting pins then support, pressing firmly.
Set the time when first switching on the appliance. Hour and minute digits will flash.
Adjust oven power for compatibility with domestic supply (<2.9 kW) or default (>3 kW).
Heat oven empty to 250°C for one hour to remove manufacturing odours.
For cooking any dish on one shelf only.
For cooking different foods requiring the same temperature on multiple shelves (max three).
For baking pizza and bread. Swap tray positions halfway through cooking.
For grilling meats, cooking vegetables, or toasting bread. Use dripping pan for meat.
For roasting large joints of meat. Use a dripping pan to collect cooking juices.
For proofing dough. Turn thermostat knob to the relevant symbol to activate.
For cooking roasts on one shelf, preventing drying via gentle air circulation.
Eliminates cooking spatters using a high-temperature cleaning cycle.
Use steam for excellent results. Pour water into cold oven and select function.
Turn selection knob for function, thermostat knob for temperature to start operation.
Signal indicates preheating. Fixed signal indicates target temperature reached.
Audible signal and display indicate function finished. Turn knob to select new function or off.
Set cooking time by pressing until icon flashes, then use +/- buttons to set time.
Set end time to delay function start. Function pauses until needed to finish at set time.
Use display as a timer without interrupting cooking. Set time using +/- buttons.
Procedure for self-cleaning cycle. Remove accessories. Ensure ventilation. Door locks during cycle.
Table detailing recipes, functions, preheat temps, duration, and required accessories.
Table for steam cooking recipes, including water volume, preheat, temperature, duration, and accessories.
Instructions for removing limescale after steam cooking using vinegar or descaling product.
Check power supply and mains connection. Turn off and restart oven to resolve faults.
Contact After-sales Service and state the number following the 'F' error code.
Allow the oven to cool down before activating a function if 'Hot' message is displayed.
