EasyManua.ls Logo

Bauknecht WA 43510 User Manual

Bauknecht WA 43510
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Bauknecht AG, Industriestrasse 36, 5600 Lenzburg, www.bauknecht.ch
Verkauf Telefon 0848 801 002 Fax 0848 801 017 verkauf@bauknecht.ch
Kundendienst Telefon 0848 801 001 Fax 0848 801 003 service@bauknecht.ch
Ersatzteile Telefon 0848 801 005 Fax 0848 801 004 ersatzteilverkauf@bauknecht.ch
Instructions for use
WA 43510
Question and Answer IconNeed help?

Do you have a question about the Bauknecht WA 43510 and is the answer not in the manual?

Bauknecht WA 43510 Specifications

General IconGeneral
BrandBauknecht
ModelWA 43510
CategoryWasher
LanguageEnglish

Summary

PROGRAMME GUIDE

Before Using the Washing Machine

Installation

Remove the Transit Bolts

Instructions for removing transport bolts before initial use.

Adjust the Feet

Guide to levelling the appliance using its adjustable feet.

Connect the Water Inlet Hose

Steps for connecting the water supply hose correctly.

Detergent and Additives

Removing the Filter

Draining Residual Water

Care and Maintenance

Trouble-Shooting Guide

Appliance Does Not Start

Checks for when the appliance won't turn on or lights up.

Start/Pause Light Flashing

Troubleshooting when the start/pause indicator flashes.

Programme Stops During Cycle

Identifying reasons why the washing machine stops mid-program.

Vibration During Spin Cycle

How to resolve issues with excessive machine vibration.

Poor Final Spin Results

Addressing issues with laundry remaining too wet after spinning.

Fault Indicators

Water Supply Fault

Troubleshooting lack of water or insufficient supply.

Draining Fault

Diagnosing and fixing problems with waste water not being pumped out.

Electrical Component Fault

Identifying and addressing faults in the appliance's electrical system.

Water Stop Fault

Troubleshooting issues related to the water stop safety system.

Water Stop Fault at Programme Selector

Specific water stop faults detected when the selector is in the "" position.

Water Not Pumped Out

Troubleshooting the 'FP' error code for water not draining.

Related product manuals