What to do if my Bauknecht Washer won't start and the start/pause light is flashing?
If your Bauknecht Washer doesn't start and the Start/Pause light is flashing, check the following: * Make sure the door is properly closed (child safety). * Ensure the Start/Pause button has been pressed. * Check if the Water tap closed indication light is on. If so, open the water tap and press the Start/Pause button.
How to fix Bauknecht Washer if it doesn't start and no lights are on?
If your Bauknecht Washer won't start and no indicator lights are on, ensure the mains plug is properly inserted into the socket. Also, verify that the wall socket is functioning correctly by testing it with a table lamp or similar appliance.
Why is my Bauknecht WA 9586 vibrating during the spin cycle?
If your Bauknecht Washer vibrates excessively during the spin cycle, check if the washing machine is level and standing firmly on all four feet. Also, ensure that the transport bolts have been removed before using the machine.
What to do if Bauknecht WA 9586 stops mid cycle?
If your Bauknecht Washer stops during a program, check these possible issues: 1. If the Anticrease lamp is lit, press the Start/Pause button or select and start the Drain program to end this option. 2. If another program was selected and the Start/Pause light is flashing, reselect your desired program and press Start/Pause again. 3. If the door was opened and the Start/Pause light is flashing, close the door and press Start/Pause again. 4. The washing machine’s safety system may have been activated.
Why are the spin results poor on my Bauknecht WA 9586 Washer?
If the final spin results of your Bauknecht Washer are poor, and the laundry is still too wet, try adding smaller articles of laundry and repeating the spin cycle. Excessive foam can also prevent spinning, so use the correct amount of detergent. Also, check that the spin speed selector has not been set to “0”. Excessive foam formation may prevent spinning, so use the correct amount of detergent.
What does it mean when the 'water tap closed' light is on my Bauknecht WA 9586 Washer?
If the “Water tap closed” light is on for your Bauknecht Washer, verify that the water tap is fully open and that there is sufficient water supply pressure. Also, check the water hose for any kinks and inspect the mesh filters of the water supply for blockages. Ensure the water hose is not frozen. If your washing machine has an inlet hose with a safety valve inspection window, and it is red, replace the hose. After resolving the issue, restart the program by pressing Start/Pause again.
Why is there residue in the detergent drawer of my Bauknecht Washer after washing?
If there's residue from detergent and additives left in the detergent drawer of your Bauknecht Washer after a wash, check if the cover grid of the softener chamber and the separator of the main wash chamber are correctly installed in the detergent dispenser and are clean. Also, make sure sufficient water is entering; the mesh filters of the water supply could be blocked. Finally, ensure the position of the separator in the main wash chamber is adapted to the use of powder or liquid detergent.
What does the 'clean pump' light mean on my Bauknecht WA 9586?
If the “Clean pump” light is illuminated on your Bauknecht Washer, unplug the appliance. Check the drain hose for kinks and inspect the pump or filter for blockages. Make sure the water has cooled before draining the appliance. Also, check if the drain hose is frozen. After checking, plug the appliance in again, then select and start the Drain program or push the Reset button for at least 3 seconds and restart the desired program.
Data on water and energy consumption for each wash programme.
Instructions on adding detergent and selecting the wash programme.
Guidance on selecting special wash options for tailored washing.
Explanation of warning lights for faults like 'Service' or 'Water tap closed'.
Steps and indicators for the completion of a wash programme.
Procedure to stop and reset a wash cycle before its normal end.
Steps for unpacking and checking the washing machine for damage and completeness.
Instructions on removing transport bolts before operating the machine.
Guidance on correctly positioning and levelling the washing machine.
Information about connecting the water supply hose and required pressure.
How to connect the drain hose correctly to avoid siphoning.
Requirements for safe electrical connection and earthing of the appliance.
Notes on the recyclability of packaging materials.
Guidance on environmentally sound disposal of packaging and old appliances.
Important safety precautions for operating the washing machine.
Advice on optimizing energy, water, and detergent usage.
Statement of compliance with European directives.
Instructions on how to open and close the washing machine door.
Measures to prevent improper use by children, including door locking.
Procedure for running an initial wash cycle without laundry.
Guidelines for sorting laundry by fabric type, colour, and load size.
Warning to remove items from pockets that could damage the machine.
Advice on closing zips, buttons, and securing loose items before washing.
Methods for dealing with stains, including pre-treatment and stain removers.
Instructions for using dyes and bleaches suitable for washing machines.
How to load laundry into the drum, avoiding overfilling.
Factors influencing detergent selection: fabric, colour, temperature, soiling.
Notes on detergent residues, suitable products, and avoiding solvents.
Guidance on detergent dosage based on load size, soiling, and water hardness.
Information on the effects of too much or too little detergent.
Diagram and explanation of detergent drawer compartments for different additives.
Instructions for using chlorine bleach in the softener compartment.
Procedure for adding starch solution during the Rinse and Spin cycle.
Instructions on adjusting the detergent drawer separator for powder or liquid use.
Procedure for cleaning the pump filter to ensure proper drainage and spin cycles.
Safety warning to unplug the appliance and ensure water has cooled before draining.
Detailed steps for accessing and cleaning the filter.
Cleaning instructions for the outer surfaces and control panel.
Tips for keeping the inside of the appliance clean, including occasional hot washes.
How to clean and check the condition of the door seal.
Reminder to check and clean the filter regularly (referencing another section).
Checking hoses for damage, brittleness, cracks, and cleaning the inlet mesh filter.
Instructions for removing, cleaning, and refitting the detergent dispenser parts.
Guidance on replacing damaged water supply hoses.
Procedure to clean the mesh filter located in the water inlet hose.
Checks for when the machine does not start and indicator lamps are off.
Troubleshooting steps when the machine won't start and the 'Start/Pause' light flashes.
Checks for common reasons why the appliance stops mid-cycle.
Checks for causes of detergent residue left in the dispenser after wash.
Checks for causes of excessive vibration during the spin cycle.
Reasons for laundry being too wet, including imbalance and foam.
Explanation for changes in displayed programme time due to load or water temp.
Troubleshooting for 'Water tap closed' fault, including hose and filter checks.
Troubleshooting for 'Clean pump' fault, focusing on drain hose and filter blockages.
Troubleshooting for 'Service' indication, including failure codes 'F02'-'F35', 'FA', 'Fod'.
Steps to take before contacting service and information to provide.
Information on optional accessories like pedestal drawers and stacking kits.
Instructions on how to safely move the washing machine without lifting by the worktop.
Steps required before transporting the appliance, including draining and securing bolts.
Instructions for replacing the fuse in a BS 1363A fused plug.
Guidance on ensuring compatibility of the plug and socket, and when to contact service.
To Next Page
General
