Do you have a question about the Bauknecht WAT 6517 and is the answer not in the manual?
Instructions for running the DOMINO control system test program.
Describes failures related to water intake, aquastop, and potential causes.
Details errors for excessive drain time and slow water heating.
Explains the error code for an out-of-range water temperature sensor.
Covers errors related to the drive motor tachometer, triac, and heating circuit.
Explains failures related to door lock engagement and EEPROM data integrity.
Details errors for drum up switch detection and user interface communication.
Describes failures indicated by pressure switch faults and overflow conditions.
Explains failures related to the pump driver circuit and motor reversing relay.
Covers errors for tapped field failure and foam detection during wash cycles.
Details the error for blocked drum detection in top loader appliances.
Loading...