Baumatic AS26SS - Maintaining the Cast Iron Pan Stands; Installation

24
not blocked.
eassemble the burners in the
original way.
o Wipe the pan stands over with a soft, damp cloth that has been
ng out after
being taken out of the soapy water.
o To maintain the appearance of the cast iron pan stands, we
mmend that you rub a small amount of olive oil into
the pan stands. After you have finished cleaning them.
o
o Before placing the burners back on the hob top, make sure that
the gas jet is
o IMPORTANT: Make sure that you r
Maintaining the cast iron pan stands
o IMPORTANT: Make sure that the hob surface and pan stands
have cooled before you attempt to touch them.
put into warm soapy water. The cloth should be wru
o Using a paper towel, thoroughly dry the pan stands.
would reco
Installati n
The installation must be carried out by a GASSAFE
registered installer, in accordance with the current
o Gas Safety Regulations (Installation & Use)
ations (issued by the Department of Environment)
ssued by the Scottish Development
Department)
o IEE Wiring Regulations
BS 5482 Installation of Domestic LPG Appliances)
o BS 5440 Installation of Flues and Ventilation for Gas Appliances
o Baumatic Ltd Installation Instructions
version of the following.
o Building Regul
o Building Standards (I
o Electricity at Work Regulations BS 6172
o Installation of Domestic Gas Cooking Appliances (if necessary,