USER INSTRUCTIONS
USING THE 60 min TIMER (B150)
This run-back timer can be used independently of an oven cooking
cycle for up to 60 minutes of timing.
1)
To set the timer, turn the knob fully clockwise until it stops and
then back to the required time.
2)
After expiry of the set time, the timer will have returned to
position ‘0’ and an acoustic signal will be briefly emitted.
PYROLITIC CLEANING (B484 only)
Select the self-cleaning function . When selected, this will
automatically set a cleaning duration of 90 minutes (1½ hours).
This function cleans by raising the oven temperature to 475
°
. The
resultant ash deposits can be wiped away with a moist cloth when
the oven has cooled down but is still slightly warm.
If an increased cleaning duration is required, it can be increased in
the following manner: Select the self-cleaning function as above.
Press the manual button
on the electronic timer. 1:30 will appear
in the display, this time can now be increased to up to a maximum
of 3 hours by using the + or – buttons.
17
To Next Page
Loading...
