INSTALLATION INSTRUCTIONS
INSTRUCTIONS FOR INSTALLATION
This appliance must be installed by a competent person, in
accordance with the current version of the following UK
Regulations and Safety Standards or their European Norm
replacements:
Building Regulations
(issued by the Department of Environment)
Building Standards
(issued by the Scottish Development
Department)
IEE Wiring Regulations
Electricity at Work Regulations
PRE-COMMISSIONING THE APPLIANCE
When unpacked, check that the following parts are included with
the appliance:
·
Baumatic Instruction and Installation Book
·
1 oven shelf (B99, B150, ) or 2 oven shelves (all other
models).
·
1 set comprising Grill Pan, Trivet and handle.
· Two side-protection strips.
· Trim and oven fixing screws(see fig.2 pag.22)
POSITIONING THE APPLIANCE
(see also Figures 2 and 3
page 22)
These appliances are classified as Class 3. All models can be built
into a standard 600mm kitchen unit, with the exception of model
B897 which require a purpose built housing unit.
A minimum of 4mm of distance must be allowed between the oven
and any adjacent cabinet doors and drawers to allow the side
protection rails to be fitted and form an integral part of the
installation.
20
To Next Page
Loading...
