INSTALLATION INSTRUCTIONS
REPLACING THE OVEN LIGHT
(Not covered by the appliance
warranty)
Disconnect the appliance from the
electricity supply, remove the oven
door (as described previously) as well
as the oven shelves.
Remove the protective glass light-cover
by twisting anti-clockwise.
Unscrew the old bulb and discard
safely, replace with the type specified
in the Technical Data and refit the cover.
NOTE – The glass cover may be tight and may therefore
require a tight grip to release.
CARE AND REPLACEMENT OF CATALYTIC
LINERS
(Where fitted / Not covered by the appliance warranty).
To keep the ‘stay clean’ liners operating effectively, the oven
should be heated to at least 200
°
C whenever heavy soiling has
occurred, in order to avoid permanent soiling.
If the liners are allowed to become black and shiny, they must be
replaced by new items. Remove all internal accessories to facilitate
replacement of the liners.
26
To Next Page
Loading...
