Using the hob top
Before first use
IMPORTANT: You should clean the hob surface
(see “Cleaning and maintenance” section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
Using the hob top zones
o Each zone on the gas hob top is controlled by a control knob.
o To turn on a cooking zone use the relevant control knob for the
zone you wish to use.
o Press and turn the control knob to the
large flame position.
o While still pressing in the control knob,
press and hold the bottom half of the
ignition button until the burner ignites.
o For a maximum temperature keep the
dial turned to the large flame position.
To Next Page
Loading...
