Baumatic BDW45.1 Operating Instructions

Operating Instructions – Dishwasher Baumatic BDW45.1
Quick Start
1. Load dishes
2. Add detergent
3. Press the button
4. Select a wash programme
5. Select ECO (optional)
6. Check nothing is obstructing the spray arm.
7. Start – close the drawer and press the button.
Finish – The appliance will beep six times to indicate the end of the wash programme. At the end of the wash
programme the drying fan will continue to run for a set time. The fan assists with drying
Control Panel
Note: Your dishwasher’s control panel is on the top lip of the door. If your appliance is being installed under a
worktop, you will need to open the door to see the control panel.
1. Programme indicator light: when you select the washing programme, the corresponding light will display.
2. Programme key: press to select washing programme. Multiple presses select different programmes.
3. Salt and rinse aid warning light: Comes on when the softener or dispenser needs to be refilled.
4. Delay start time: displays the delay start time. Also displays the water temperature and ERROR codes.
5. Delay key: press to set the delay start time. One press sets the wash cycle forward by 1 hour (up to 24 hours into
the future).
6. Power on light: comes on when Power ON/OFF button is pressed down.
7. ON/OFF button: turns the power supply on and off.
Detergent
To open the detergent dispenser door, use the catch on its lower side.
Note:
Always check the wash cycle table for dosage advice. Never overfill the dispenser.

Baumatic BDW45.1 Specifications

General

Door color	Not applicable
Display type	LED
Appliance placement	Fully built-in
Control panel color	-
Washing class	A
Noise level	53 dB
Delayed start timer	Yes
Number of place settings	8 place settings
Number of washing programs	7
Water consumption per cycle	13 L
Energy consumption per cycle	0.81 kWh

Weight and Dimensions

Depth	540 mm
Width	445 mm
Height	850 mm