Why my Baumatic BDWI640 doesn’t start?
If your Baumatic Dishwasher doesn't start, several factors could be at play. First, check the fuse or circuit breaker and replace or reset it if necessary. Ensure the dishwasher is powered on. Verify that the water supply is properly connected and turned on, ensuring adequate water pressure. Lastly, confirm that the dishwasher door is fully closed and latched.
What to do if water doesn't drain from my Baumatic BDWI640 Dishwasher?
If water isn't draining from your Baumatic Dishwasher, inspect the drain hose for any kinks. Also, check the coarse filter for clogs. Ensure your kitchen sink is draining properly, as a clogged sink can affect dishwasher drainage.
What to do if my Baumatic BDWI640 isn't cleaning dishes?
If your Baumatic Dishwasher isn't cleaning dishes properly, several factors could be the cause. Ensure dishes are loaded correctly to avoid blocking spray arms. Select a more intensive wash program. Use an adequate amount of detergent or try a different brand. Rearrange items to allow the spray arms to rotate freely. Also, check and clean the filter assembly at the base of the dishwasher.
How to improve drying in my Baumatic BDWI640 Dishwasher?
If your Baumatic Dishwasher isn't drying dishes effectively, consider these points: Ensure proper loading according to instructions. Increase the rinse-aid amount or refill the dispenser. Avoid unloading immediately after washing. Select a program with a longer drying time. Be aware that low-quality coated cutlery may not dry well in a dishwasher.
What causes a knocking noise in my Baumatic BDWI640 Dishwasher?
A knocking noise in the wash cabinet of your Baumatic Dishwasher often means a spray arm is hitting something. Stop the program and move any items that are blocking the spray arm.
Why there are suds in my Baumatic BDWI640?
If you find suds in your Baumatic Dishwasher, it's likely due to using the wrong type of detergent. Be sure to use only detergents specifically designed for dishwashers. Also, immediately wipe up any spilled rinse-aid to prevent suds from forming.
How to prevent cloudiness on glassware in Baumatic Dishwasher?
Cloudiness on glassware in your Baumatic Dishwasher is often caused by a combination of soft water and using too much detergent. If you have soft water, try using less detergent. Additionally, select the RAPID program for washing glassware to help keep them clean.
Why are there rust stains on cutlery in my Baumatic Dishwasher?
Rust stains on cutlery in your Baumatic Dishwasher can occur if the items aren't corrosion resistant; avoid washing these items in the dishwasher. If dishwasher salt was recently added, run a RAPID program without dishes to remove excess salt traces. Check the water softener lid to ensure it's sealed properly.
Why is the interior of my Baumatic Dishwasher stained?
A stained interior in your Baumatic Dishwasher may be due to using a detergent with colourant. Ensure that the detergent you use does not contain any colourant.
How to remove black marks from dishes in my Baumatic BDWI640 Dishwasher?
Black or grey marks on dishes in your Baumatic Dishwasher are usually caused by aluminum utensils rubbing against the dishes. To remove these marks, use a mild abrasive cleaner.
General| Door color | Not applicable |
|---|---|
| Appliance placement | Fully built-in |
| Control panel color | Stainless steel |
| Water consumption per cycle | 10 L |
| Energy consumption per cycle | 1.04 kWh |
| Washing class | A |
| Noise level | 49 dB |
| Delayed start timer | Yes |
| Dishwashing programs | Eco, Glass/delicate, Intensive, Normal |
| Number of place settings | 14 place settings |
| Number of washing programs | 6 |
| Number of temperature settings | 4 |
Weight and Dimensions| Width | - mm |
|---|
Covers operational safety, repairs, and potential hazards.
Instructions to prevent children from accessing or misusing the appliance.
Steps for before first use, filling salt, and rinse aid.
Guide to choosing and starting a wash program.
Overview and cleaning instructions for the three-level filter system.
Explanation of flashing lights indicating faults.
Solutions for common issues like starting, draining, and stains.
To Next Page
