o Close the dishwasher door. After about 10 seconds the wash
program will continue automatically.
At the end of a wash program
o The time display will flash for 8 seconds and a buzzer will sound.
o Open the door of the appliance.
o Use the ON/OFF button (1) to switch the dishwasher off.
o Wait for about 15 minutes before unloading the dishwasher to
avoid handling the dishes and utensils while they are still hot and
more susceptible to breakage. They will also dry better.
o It is recommended that you unload the lower basket first to
avoid water dripping from the upper basket onto the dishes in
the lower one.
Delay start function
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Turn the appliance on by using the ON/OFF button
(1).
o IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o Press the program button (7) to choose an
appropriate wash program for the load that you
are washing. The relevant program indicator (6)
will light to show which program you have
selected.
25
To Next Page
Loading...
