Baumatic BMC253SS - Using Your Microwave

14
Using your microwave
The adjustment dial
o The adjustment dial (E) should only be turned clockwise
(towards the book symbol) if you want to use the auto menu
function.
o For all other purposes and settings, the adjustment dial (E)
should be turned anti-clockwise (towards the clock symbol).
Setting the clock
o When your appliance is connected to the power supply for the
first time, the LED display (A) will show 0.00 and an audible
signal will sound once.
o Press the clock/kitchen timer button (G) to enter the clock
setting mode.
o Use the adjustment dial (E) to adjust the hour time. You can
adjust the hour time between 0 – 23 in 24 hour clock mode.
o Press the clock/kitchen timer button (G) to confirm the hour
time. The minute digits will flash.
o Turn the adjustment dial (E) to adjust the minute time.
o Press the clock/kitchen timer button (G) to confirm the minute
time. The “:” symbol will flash and the time of day will light on
the LED display (A).
o If during the clock setting process the stop/clear button (C) is
pressed, the microwave will return to the previous step.
Before first use
o To remove any residue from the oven that may have been left
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o Set the microwave on its highest power level for 2 minutes.
o The oven cavity a
nd outside of the appliance should be cleaned
with warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used. The appliance should be
thoroughly dried afterwards.